Choosing the right stabilizer jack pads can dramatically improve RV stability on uneven terrain. This guide highlights five highly-rated options that protect jacks, prevent sinking, and absorb vibrations. All picks are compatible with common scissor jack feet and are designed to withstand UV exposure, water, and harsh outdoor elements. Use the buying guide below to compare materials, sizes, and installation ease to fit your RV and camping style.
| Product | Brand | Approx. Size (L x W) | Notes |
|---|---|---|---|
| SnapPad Xtra RV Leveling Pads (6-Pack) | SnapPad | 9″ round pads | Permanent, USA-made, larger footprint |
| Camco RV Stabilizing Jack Pads (4-Pack, 44595) | Camco | 6 3/16″ x 6 3/16″ | Interlocking grid design, UV-stabilized resin |
| Camco 14″ x 12″ Stabilizer Pads (44541) | Camco | 14″ x 12″ | Large base, built-in handle, American-made |
| Kohree 4 Pack RV Stabilizer Jack Pads | Kohree | 8.75″–9.5″ x 5.51″ | Solid rubber, waterproof, drainage bottom |
| USA Made RV Leveling Jack Flex Pads (4-Pack) | bullke | 12″ x 12″ x 0.5″ | Non-slip, shock-absorbing rubber pads |
SnapPad Xtra RV Leveling Pads
SnapPad Xtra leveling blocks are designed to work with a variety of RVs, including Fifth Wheels, Travel Trailers, Class A, and Class C motorhomes. The six-pack provides a permanent solution tailored to LCI four-point automatic leveling systems with 9″ jacks. The design offers a larger footprint and improved vibration dampening, helping stabilize on gravel or uneven terrain. Made in the USA from recycled tires, these pads are intended to stay in place, reducing the need to crawl under the rig repeatedly. Always verify compatibility with your leveling system and jack feet before ordering.
Camco RV Stabilizing Jack Pads (4-Pack, 44595)
This Camco set features a solid base that creates a stable foundation to prevent jacks from sinking into soft ground. The interlocking design disperses heavy loads across a 6 3/16″ by 6 3/16″ area. UV-stabilized resin construction adds durability, and the four pads help you level a trailer on uneven soils, gravel, or near tree roots. The design prioritizes enduring performance in outdoor environments and is proudly manufactured in the USA.
Camco Camper/RV Large Stabilizer Jack Pads – 14” x 12”
These large stabilizer pads provide a broad, solid base to prevent jacks from sinking into soft ground on uneven surfaces. The EPA-approved, patent-protected design emphasizes durability and American craftsmanship. With a large 14″ x 12″ footprint and a 7/8″ thickness, they distribute weight effectively and absorb ground pressure, making them suitable for combo setups, uneven gravel, and roots. Built for rugged outdoor use, they are a common choice for longer RV journeys.
Kohree 2 Pack RV Stabilizer Jack Pads
Designed to fit scissor jack foot plates 8.75″–9.5″ long and 5.51″ wide, these Kohree pads are a sturdy, economical replacement for wooden blocks. Each pad weighs 2.9 pounds and offers water resistance with a drainage design to prevent pooling. Built to withstand UV exposure, heat, oil, tar, mud, and other elements, these pads protect the jack bases and extend service life, suitable for trailers and fifth wheels.
Kohree 4 Pack Stabilizer Jack Pads
This four-pack from Kohree is designed for scissor jacks with an 8.75″–9.5″ base and 5.51″ width. They emphasize high-strength rubber construction, durability under UV and weather exposure, and a waterproof, drain-enabled bottom. The pads are lightweight at 2.9 pounds each, easy to carry, and provide reliable protection against gravel, asphalt, and snow damage while extending jack life.
OULEME RV Leveling Block Flex Pads (4-Pack)
OULEME’s 12″ square flex pads are designed for anti-slip performance and vibration reduction on uneven surfaces. Each pad measures 12″ L x 12″ W with a thickness of 3/4″ and is rated to provide quiet, stable support for jacks and stabilizers. The non-slip, anti-friction surface helps prevent plastic leveling blocks from sliding and reduces wear on the blocks, while the shock-absorbing material cushions RV jacks on gravel, dirt, or asphalt.
Buying Guide: Key Purchase Considerations
- Size compatibility: Compare your stabilizer jack feet dimensions to the pad’s footprint. Most pads target bases around 8.75″–9.5″ long and 5.5″ wide; larger pads suit bigger jacks.
- Material and durability: Rubber and UV-stabilized resin offer long-term weather resistance, drainage, and flexibility. Rubber tends to provide better shock absorption.
- Surface and texture: Non-slip or anti-friction surfaces prevent blocks from sliding on various ground types, including gravel and dirt.
- Brand and warranty: Reputable brands with US-made or durable materials may deliver longer lifespans and customer support.
- Portability and storage: Lighter pads are easier to carry, especially when you travel with limited storage space.
- Environmental exposure: Look for waterproof design and drainage features to avoid water pooling and material degradation under sun exposure.
- Installation and compatibility: Check if pads interlock or require separate pads for each jack foot. Ensure compatibility with your leveling system and trailer type.
- Environmental impact: Some pads use recycled materials or are designed to be reusable across multiple trips, contributing to reduced waste.
When selecting RV stabilizer jack pads, weigh the balance between footprint, weight, and ease of use. Larger pads provide more stability on soft or uneven surfaces but may require more storage space. Rubber options typically offer superior shock absorption and durability, while UV-stabilized resins are well-suited for high-UV climates. For permanent setups or frequent camping, consider a four- to six-pack with a larger footprint and durable construction to minimize ground disturbance and maximize jack protection.